|
|
|
|
 |

SURFACE FINISH
Seven main types of surfaces are considered when ordering stones. The surface
finish ranges from rough to polished. The chief surface finish types are:
| Honed: |
 |
 |
 |
Honing gives a flat to low sheen gloss. |
 |
It offers different levels of gloss for selection. |
 |
Although this surface is very smooth, it is often very
porous, and hence used in high traffic buildings. |
| Polished: |
 |
 |
 |
This is a smooth and glossy surface. |
 |
Polish tends wear off with time due to heavy foot
traffic and improper maintenance procedures. |
 |
The brilliance of colors and grains comes from the
reflectivity of polished crystals. The shine is attributed to the reflection of
light by the crystals. This shine comes about by using polishing bricks and
powders. |
| Flamed: |
 |
 |
 |
This surface is rough in texture and is
developed through intense heat during fabrication. |
 |
The stone is heated and crystals begin to pop, thus
forming a rough surface. |
 |
This surface is very porous and must be treated with
Stoneguard. |
| Tumbled: |
 |
 |
 |
It gives the stones an archaic appearance. |
 |
The slightly rough texture is achieved by tumbling small
pieces of marble, limestone, and sometimes granite. |
 |
It often requires application of Stone Color Enhancer to
bring out the colors. |
| Sand Blasted: |
 |
 |
 |
Pressurized flow of sand and water that
provides the stone a matte, textured surface. |
| Sawn: |
 |
 |
 |
This surface is achieved through a process
using a gang saw. |
| Bush Hammered: |
 |
 |
 |
This rough, textured surface is developed
through pounding action on the stone. |
 |
The degree of roughness is controllable. |
|
 |
|
|
 |
|
|
|
Best viewed in 1024*768 resolution |
|